PRE-CAST OVEN DOORFOR COKE OVEN
INTRODUCTION
The surface of pre-cast refractory door is made of composite ceramic
material.Pre-cast refractory is shaped by high frequency vibration.
The material has low porosity,high density and good uniformity.There
is crystalline ceramic refractory adhere to the pre-cast surface,which
have high strength,good abrasion resistance and corrosion resistance.
It has been reduced the physical damage during the operation and tar
and other chemicals erosion to the refractory.
FEATURE
1.Simple structure and easy to install
2.Good integrity and impermeabiity
3.The working life of the door is longer than the traditional one.
4.The pre-cast refractory door has the performance of energy-saving
and environment-friendly,which can help the factory to reduce the
cost and improve the overall working efficiency.
ZERO THERMAL EXPANSION SILICA BRICK FOR COKE OVEN
INTRODUCTION
Zero thermal expansion silica brick is also known as fused-quartz brick or thermal shock resistance silica brick.
It has extremely low thermal expansion rate,excellent thermal shock resistance,high SiO2 content etc.Zero thermal expansion silica brick is widely used in hot repair project on coke oven.
By using zero thermal expansion silica brick,the maintenance time for coke oven shortens greatly.
Cunse has the ability on providing the hot repair solution on coke oven,we also can do the EPC project on regular maintenance of coke oven.
NEW CERAMIC AIR DISTRIBUTION
INTRODUCTION
The new ceramic air distribution is suitable for the air distribution hole of the heat recovery coke oven,and can also be used as the door material of the horizontal coke oven.This material has excellent resistance to rapid cooling and rapid heating and chemical stability,which can significantly improve production Efficiency,reduced maintenance cost and frequency.
NEW CERAMIC CHUTE
INTRODUCTION
The new ceramic chute is suitable for the grooves and other parts where the high-temperature solution flows through.The surface is coated with a new high-performance microcrystalline glaze layer,which has the characteristics of anti-flaking,wear-resistant,anti-erosion and non-sticking materials,which can significantly improve production efficiency and reduce maintenance cost and frequency,avoid solution contamination.
ASCENDING PIPE PRE-CAST REFRACTORY FOR COKE OVEN
INTRODUCTION
The upper area of ascending pipe is used casting method by monolithics and the lower area is made of high temperature glazed refractory.By using the innovating technology,our ascending pipe is an ideal choice to avoid the gather of the coke and carbon with excellent heat preservation.
| TECHNICAL INDEX |
| TEM |
PRE-CAST DOOR |
| w(Al2O3)(%) |
≥50 |
| w(MgO)(%) |
≥3 |
| Apparent Porosity (%) |
≤28 |
| Bulk Density (g/cm³) |
≥2.1 |
| Cold Crushing Strength(MPa) |
≥35 |
| Rupture Strength (MPa) |
≥4 |
| Thermal Conductivity W/(m ·K)1000ºC (Heating side) |
≤1.2 |
| Thermal Shock Resistance(1100ºC,water cooling)/cycle |
≥50 |
| TECHNICAL INDEX |
| ITEM |
INDEX |
| CL-1100 |
CL-1300 |
CL-1550 |
| Max Working Temp./ºC |
1100ºC |
1300ºC |
1550ºC |
| W(Al203)/% |
≥50 |
≥60 |
≥65 |
| W(SiO2)/% |
≤40 |
≤35 |
≤25 |
| w(MgO)/% |
≥3 |
≥3 |
≥8 |
| Bulk Density /g/cm3 |
≥2.1 |
≥2.2 |
≥2.5 |
| Apparent Porosity/% |
≤28 |
≤28 |
≤26 |
| Cold Crushing Strength/Mpa |
≥35 |
≥35 |
≥50 |
| Modulus of Rupture /Mpa |
≥4 |
≥5 |
≥7 |
| Thermal Shock Resistance(1100ºC,water cooling) |
≥50 |
≥50 |
≥50 |
| Thermal Conductivity/W(m.K)1000ºC(hot face) |
≤1.2 |
≤1.1 |
≤1.3 |
| Typical using for |
aluminum,
zinc,lead |
Copper
Silver |
Steel |
| NEW CERAMIC CHUTE TECHNICAL INDEX |
| ITEM |
INDEX |
| CL-1100 |
CL-1300 |
CL-1550 |
| Max Working Temp./ºC |
1100ºC |
1300ºC |
1550ºC |
| W(Al203)/% |
≥50 |
≥60 |
≥65 |
| W(SiO2)/% |
≤40 |
≤35 |
≤25 |
| w(MgO)/% |
≥3 |
≥3 |
≥8 |
| Bulk Density /g/cm3 |
≥2.1 |
≥2.2 |
≥2.5 |
| Apparent Porosity/% |
≤28 |
≤28 |
≤26 |
| Cold Crushing Strength/Mpa |
≥35 |
≥35 |
≥50 |
| Modulus of Rupture /Mpa |
≥4 |
≥5 |
≥7 |
| Thermal Shock Resistance(1100ºC,water cooling) |
≥50 |
≥50 |
≥50 |
| Thermal Conductivity/W(m.K)1000ºC(hot face) |
≤1.2 |
≤1.1 |
≤1.3 |
| Typical using for |
aluminum,
zinc,lead |
Copper
Silver |
Steel |
| ZERO THERMAL EXPANSION SILICA BRICK FOR COKE OVEN TECHNICAL INDEX |
| ITEM |
INDEX |
| SiO2 (%) |
≥98 |
| Al2O3 (%) |
≤0.3 |
| Fe2O3 (%) |
≤0.5 |
| CaO(%) |
≤0.2 |
| Bulk Density(g/cm³) |
≥1.8 |
| Apparent Porosity(%) |
≤20 |
| Cold Crushing Strength (Mpa) |
≥30 |
| Refractoriness Under Load (T0.6/ºC) |
≥1650 |
| Thermal Expansion(%)(1000ºC) |
≤0.2 |
| Thermal Shock Resistance(1100ºC,cooling with water) |
≥30 |
Since its establishment, the company has always adhered to the business policy of "technological innovation, harmony and win-win", and devoted itself to building the grinding industryWell known brand. Has successively won the titles of National High tech Enterprise, National Science and Technology Small and Medium sized Enterprise, and National Specialized, Refined, Unique, and New Small and Medium sized Enterprise Ren, a famous trademark in Henan Province, a member unit of the National Coated Grinding Tools Association, and a proud member of the Zhengzhou Municipal Engineering Technology Research CenterYu is also one of the five units drafting the national industry standard for high-temperature calcined corundum.
Company History
1989:In 1989, a small factory with an investment of 20000 yuan was established to produce secondary abrasives
1997:Production of first and second grade F sand and P sand began in 1997
1999:1999 Construction of the first fixed arc furnace
2003:The second-generation granulation production line was completed and put into operation in 2003
2009:2009 Construction of the first high-temperature calcined abrasive production line
2011:Construction of the first iridium plating production line in 2011
2015:In 2015, the third generation granulation processing line was built in the industrial agglomeration area
2017:In 2017, two brown corundum pouring furnaces underwent automated batching transformation
2018:2018 Ceramic Abrasive R&D Successful, Mass Production of Prefabricated Parts Project
2022:Production of white corundum electric arc furnace and granulation line will begin in 2022, and a prefabricated component expansion project will be constructed.
1. Q: Where is your company located? How can I visit there?
A: Our factory is located in Zhengzhou, China.After you arrive at Zhengzhou Airport, we will be responsible for your travel agency and other related itinerary arrangements.
2. Q: What is the minimum order quantity?
A: Our minimum order quantity is 1T.
3. Q: Can I have my own customized product?
A: Yes. Your customization requirements for logos, designs, packaging, language manuals, etc. We warmly welcome it.
4. Q: What is the delivery time?
A: It takes approximately 10-15 days to complete the order. But the specific time depends on the actual situation.
5. Q: What are the payment terms?
A: T/T, L/C, etc. (Contact customer service)
6.Q: How does your factory conduct quality control?
A: We attach great importance to quality control. Each part of our product has its own quality control center.
7. Q: How do you establish a long-term and good relationship with our business?
A: We maintain good quality and competitive prices to ensure that our customers benefit; We respect every customer, just like our friends, and sincerely do business and make friends with them, no matter where they come from.
){kind=link}